Instruction manual

7.12 Control of machine equipped with positioning motor

and solenoid automatic control

7.12.1 Control pedal

The pedal position is scanned with a proximity switch which

distinguishes 16 levels.

The meaning is in the table:

Pedal position Pedal motion Meaning

-2 Heel fully backwards Command for thread trimming (seam finish)

-1 Heel slightly backwards Command for foot lifting

0 Neutral position See note

1 Slightly forwards Command for foot lowering

2 Further forwards Sewing at minimum speed (1gear)

3 Further forwards Sewing - 2 speed gear

:::

13 Fully forwards Sewing at maximum speed (12 gear)

Note: The needle position can be pre-selected for the neutral position

(needle down/up) as well as for the foot position (down/up) at the

seam-stop (by putting the pedal in the neutral position), and for the foot

position (down/up) after the seam finishing (by treading the pedal with

heel fully backwards and putting the pedal in the neutral position).

-2

-1