Instruction manual

7.6 Foot lifting

Foot lifting with a hand lever

–

Lift the foot by pressing the lever (1) to a stop (foot remains lifted).

–

Lower the foot by returning the lever (1) to initial position or by

pressing the knee lever (2) /if there is any/ and by its subsequent

releasing or by the automatic foot lifting by means of the pedal and

subsequent pedal releasing.

–

After the foot lifting by hand lever, the machine may be started up

(e. g. when winding the hook thread).

Foot lifting with a knee lever (if there is any)

–

The foot is lifted by pressing the lever (2); the foot is lowered by

releasing the lever.

Automatic foot lifting - with solenoid - with pedal

(applies to subclasses with the positioning motor and automatic

control)

–

Tread the pedal (3) in position -1 (see section 7.11).

The foot is lifted.

–

Automatic foot lifting after trimming can be pre-selected (see

section 7.11). The foot is lowered by the pedal (3) treading in

position +1.

Attention!

At the foot lifting with the knee lever or automatically the machine must

not run. There is a threat of destruction.