Instruction manual

7.3 Bobbin fixing and hook threading

Attention! Danger of injury!

Switch the main switch off and wait for the motor stopping.

–

Tilt the flap (1), grip it and pull the bobbin case (2)

out of the hook.

–

Put the bobbin (3) in the bobbin case with the thread end (4)

oriented according to the picture (2).

–

Draw the thread end (4) through the slit (5), pull under the spring

(6) and pull into the slit (7).

–

Insert the case (2) back in the hook and press it down in the arrow

direction (8) till the lock inside the case clicks and secures it

against falling out.

–

Make one stitch without the sewn material, and drawing the thread

upper end, pull the hook thread end outwards above the throat

plate.