Operating instructions

–

Remove the dongle 2.

–

If necessary confirm the software version by pressing the “OK”key.

CAUTION !

The machine software must match the machine c lass.

If the software version differs from the machine class, do not

confirm the loading.

Switch the machine off and repeat the loading proccess using

the correct software version.

The adjustment of the control is described in the operating instructions

chapter 8 “Operating the control 510".

When switching on the automatic bartacker for the first time the

number of the installed clamping foot must be entered first.

–

Plug in mains plug.

–

Switch on main switch.

The control is initialized.

The following menu appears:

–

Press key “OK”.

–

Enter the corresponding number of the clamping foot via k eys “ñ ”

or “ò ”.

–

Press key “OK”.

–

Press key “ESC”

The screen changes over to the main menu.

Configuration