Operating instructions

6. Change sewing feet and fabric support plate

The automatic bartacker 510 is delivered with a standard sewing

equipment.

If you have received a further optional sewing equipment, this has to

be mounted as follows:

Caution: Danger of injury !

Switch off main switch.

Change sewing equipment only when main switch is switched off.

Disassemble sew ing equipment

–

Unscrew screws 3.

–

Pull off holder 5.

–

Take out sewing feet 4 and 6.

–

Unscrew screw 1.

–

Take off s upport plate 2.

Assemble sew ing equipment

–

Insert sewing feet 4 and 6.

–

Place retainer plate 5 and screw tight with screws 3.

–

Place support plate 2 and screw tight with screw 1.

ATTENTION Risk of breakage !

When changing the clamping foot enter without fail the new clamping

foot number in the menu “Equipment“.

36543