Operating instructions

1.3 Technical Data
Sewing area: maximum 60 x 100 mm
Needle system: 428; 428 Serv Nm 250;
794 (for thick sewing material only)
Needle thickness: Nm 120 - Nm 280
depending on the type of s ewing thread
and the sewing material.
Yarns: Synthetic yarns
Nm 30/3 - 8/3
Bobbin capacity: 23 m with 18/3 yarn
Stitch type: Lockstitch type 301
Number of stitches: 1100 / min
Number of stitches per 42, 58, 72 (without gear reducer)
guide curve revolution: 84, 116, 144 (with gear reducer)
Seam formation 72 stitches in 3.5 sec. or
144 stitches in 7 sec.
Looping stroke: 4 mm
Clamp stroke: max. 20 mm
Sewing material thickness: m a x . 1 6 mm
(sewing material pressed
together by the clamp)
Power: 0.55 kW
Motor rpm: max. 2800 rpm
Operating pressure: 6 bar
Air consumption: approx. 1,2 NL per work cycle
Motor specifications:
Voltage: 1 x 230V, 50/60Hz
Power: 0,55 kW
Speed: 4000 rpm
Torque: 1.2 Nm
Dimensions: (H x W x D) 1720 x 1100 x 736 mm
The listed height dimension applies to
the work height of the frame set at the
factory.
Put-through area: 210 x 140 mm
Work height: 760...1060 mm (upper edge of the table
top)
Weight: 160 kg
1
7