Operating instructions

4.2 Lubrication

For lubrication of the machine use only DA-10 lubricating oil.

DA-10 is available from DÜRKOPP ADLER AG retail outlets.

Check the oil level in the oil reservoir of the oil mister

The run of the barrel shuttle is lubricated and cooled by compressed air

enhanced with oil from the oil mister.

–

The oil level in oil reservoir 5 must not fall below the suction tube 4.

–

If necessary, top up with oil to the upper edge of the embossed

text 3.

–

For topping up screw out the oil filler screw 2.

Check the feed quantity of the oil mister w eekly

–

Under operating pressure a drop of oil should drip out of the pipe

under the viewing glass 5 after every 2 to 3 work cycles.

–

Regulate the strength of the thus created oil mist at the setting

screw 1.