Operating instructions

–
Check the water level in the pressure regulator.
The water level should not be allowed to rise to the filter insert 3.
After screwing in the drain screw 5 blow the water out of the water
separator 4 under pressure.
Dirt and condensation water are eliminated through the filter insert 3.
Wash out the dirty filter bowl and filter insert with naphtha after a
certain period of operation and blow clean with compressed air.
ATTENTION !
Do not use solvents for washing!
They destroy the filter bowl.
Cleaning as required:
–
Empty sump pan 1 of the central recirculating-lubrication unit.
–
Empty collection bag 2 of the thread-suction device and remove any
accumulations of fluff (e.g. with a compressed air gun).
1
19
2
3
4
5
1