Operating instructions

Inserting a full bobbin

–

Place the full bobbin in the bobbin case 6 .

Here take care that when thread is being pulled off the bobbin must

turn clockw ise (see the arrow direction)!

–

Swing in the bobbin case 6.

–

Pull the thread through the slit 10 into the opening 9 on the spring 8.

ATTENTION !

A thread sliding out of slit 10 can lead to missing stitches

and needle breakage.

Therefore pull the thread so far through slit 10 until it lies secure in the

opening 9 on the spring 8.

–

Insert the bobbin case.

–

Pull the thread out of the bobbin case.

–

Close cover 1.

–

Press “ ” button.

The item counter is reset.

–

Start new sewing run.

10 6 9 8