Operating instructions

2.3 Threading the Needle Thread

Caution Risk of Injury !

Turnthemainswitchoff.

Thread the needle thread only w ith the unit turned off.

The threading of the needle thread 18 occurs as shown in the pictures

alongside in increasing numerical order:

–

Place the yarn roll on the yarn stand.

–

Thread the thread through the holes 1 of the yarn stand.

–

Thread the thread through thread guide 2.

–

Lead the thread through between the tension disks of the first

needle thread tension 3.

–

Thread the thread consecutively through thread guides 4 and 5.

–

Guide the thread through between the tension disks of the second

needle thread tension 6.

–

Thread the thread consecutively through the hole in the thread pull

7 and thread guide 8.

–

Wind the thread from the bottom approx. two times around the

thread roller 9.

–

Guide the thread through the thread controller spring 10.

–

Guide the thread under the thread guide 12.

–

Open the head cover.

–

Thread the thread through the hole in the thread lever 13.

–

Guide the thread through the hole in the thread control plate 14.

–

Insert the thread from the side into the thread gripper 15.

–

Thread the thread through the thread guide 17 on the needle bar.

–

Thread the thread from the front to the back through the eye of the

needle.