Operating instructions

–

For a secure sewing-on pull the thread end hanging out of the

needle to the side when starting the first sewing sequence and hold

it tight.

After the first stitches the thread can be released again.

–

The automatic sewing sequence runs through according to the

selected sewing program.

For an exact description of the different sewing programs see

“Quick User ’s manual”.

–

After the sewing sequence ends the clamps are raised

automatically.

–

Remove the sewing material.

Quick stop

The safety system of the 506-3 has two different options for the

immediate shut-off of the unit by operator error, needle breakage,

thread breakage etc.:

–

Pressing the Sto p key 1 on the front panel of the controls.

The sewing sequence is interrupted.

–

Pressing the Sto p key 2 on the head cover.

The sewing sequence is interrupted.

Bring the sew ing machine t o its starting position:

–

Press button 3 on the sewing head.

The needle moves to its uppermost position.

–

Press button 3 on the sewing head again.

The automatic sewing machine slowly returns to its starting

position.