Operating instructions

2. Operation

2.1 Automatic Sewing Sequence

ATTENTION !

The starting of a sewing sequence is only possible with the head

cover 1 and cover 2 for the hook area closed.

If the head cover or cover for the hook area is open all functions of the

controls are blocked.

Work procedure (in foot switch mode 1)

–

Turnthemainswitch3on.

The clamps a re in their upper position.

–

Select sewing program.

–

Align the sewing material under the clamps.

Depending on the type of work s equence this can occur according

to the markings or the stops mounted specifically for the customer.

Caution Risk of Injury !

Keep hands free of the lowering clamps.

–

Operate the right foot switch 4.

Both clamps lower s imultaneously.

–

Check the correct alignment of the sewing material.

To correct the sewing material alignment operate the right foot

switch again.

Both clamps rise.

–

Operate the left foot switch 5.

The automatic sewing sequence starts.