Operating instructions

8. Sewing

The description of sewing assumes the following preconditions:

–

The following functions are set at the control panel:

Beginning bartack: ON End bartack: ON

Sewing foot position before and after trimming: LOW

Needle position before trimming: LOW (position 1)

–

Main switch turned on.

–

The last sewing procedure was completed with end bartack and thread trimming.

Operation and function sequence during sewing:

Sewing procedure Operation / Remarks

Before the sewing start

Initial position

Position the material at the

seam beginning

- Pedal in rest position.

Sewing machine is idle.

Needle up. Sewing feet down.

- Step back on the pedal.

The sewing feet rise.

- Position the material.

- Release the pedal.

The sewing feet lower onto the material.

At the seam beginning

Beginning bartack and

continue sewing

Beginning bartack is

not

to be

sewn

- Step forward on the pedal and hold down.

The beginning bartack is sewn.

Subsequently the machine continues

sewing at the speed determined with the pedal.

- Press key 3 (bartack suppression).

- Step forward on the pedal.

- The machine sews at the speed determined

with the pedal.

1234