Operating instructions

6.11 Setting the Sewing Foot Pressure
The desired sewing foot pressure is set with sleeve 1.
–
Increase sewing foot pressure = Turn sleeve 1 clockwise.
Decrease sewing foot pressure = Turn sleeve 1 counterclockwise.
The setting range can be changed by turning the bolt 2.
–
Screw off sleeve 1.
–
Take out bolt 2, turn and insert again.
Fitting position
A
= Higher sewing foot pressure.
Fitting position
B
= Lower sewing foot pressure.
–
Replace sleeve 1 again and set the desired sewing foot pressure.
1
2
A B
18