Operating instructions

Key Function Display
Function key
The function of the key can be altered with
parameter F-008 (see parameter list in section
1.4)
1 = So ftsta r t O N/ OF F
2 = ornamental-stitch bar tack ON/OFF
3 = stroke adjustment
Function of the knee-switch or key:
“press and release” = ON / “press and hold” =
OFF
4 = needle cooling ON/OFF
5 = handwheel reverse ON/OFF
9
SSt ON*/OFF < - > SSc xxx
SrS ON*/OFF
hPr ON*/OFF
nh ON*/OFF
rd ON*/OFF
* when ON the left arrow above
the key is switched on.
0 Tteachinor
Sew stored sewing program
see programming instructions in the EFKA
DA82GA 3301 operating manual
Program number
Seam-section number
Seam-section stitch number
Number of stitches after light-barrier
detection
A Suppress or trigger bar tacks
If the starting or ending bar tack is switched on,
pressing the key switches the next bar tack off.
If the starting or ending bar tack is switched off,
pressing the key switches the next bar tack on.
No display
B Needle up/down
or shift function in programming mode.
Pressing this key executes a needle movement
that can be programmed with parameter 140.
See the parameter list in the set-up
instructions.
In programming mode this key has a different
function:
see set-up instructions.
No display
P Programming mode on/off
for description see set-up instructions.
Parameter number/standard display
E Switch from parameter number to parameter
value.
Confirm parameter value and switch to next
para me ter.
For description see set-up instructions.
Parameter number/standard display
+ Increase the value displayed in programming
mode
Displayed value is increased
- Decrease the value displayed in programming
mode
Displayed value is decreased
26