Operating instructions

6.10 Locking the sewing feet in the up position

Once they have been mechanically or pneumatically raised the sewing

feet can be locked in the up position with button 1 (e.g. to wind on the

looper thread).

–

With the machine at a standstill press the knee lever to the right or

push the pedal half-way back.

The sewing feet are raised.

–

Press button 1 and release the knee lever or pedal.

The raised sewing feet are locked in the up position.

–

Operate the knee lever or push the pedal half-way back once

again.

The sewing feet are no longer locked.

6.11 Setting the sewing-foot pressure

The required sewing-foot pressure is set with the knurled screw 2.

CAUTION !

The material must not “swim”.

Do not set a higher pressure than is necessary.

–

To increase the sewing-foot pressure = turn screw 2 clockwise.

–

To decrease the sewing-foot pressure = turn screw 2 anti-clockwise.