Operating instructions

2.16 Stitch Density

Caution Risk of Injury !

Pull the mains plug.

Set the stitch density only with the machine turned off.

For the whole buttonhole length

The stitch density is adjustable between 0.9 and 2 mm.

It is determined by the required strength and the appearance of the buttonhole, as well

as the thread size used.

–

Loosen screw 2.

–

Move the transport lever 1.

Movement in direction A = stitches become denser

Movement in direction B = stitche are farther apart

–

Tighten screw 2 again.

In the eye of the buttonhole

This setting has no influence on the stitch density in both seam rows.

Stitch density in the buttonhole eye to be

smaller

–

Loosen screw 4.

–

Move the stitch length regulator rail 5 in the direction of the arrow.

–

Tighten screw 4 again.

Stitch density in the buttonhole eye to be

greater

–

Loosen screw 4.

–

Replace the old stitch length regulator rail 5 with the stitch length regulator rail 3

found in the accessories pack.

–

Tighten screw 4 again.