Instruction manual

5
(5). How to adjust needle position for DA-281: (ex. use with C-200 operation box).
Power Connection
Until display【 181. PDA 】
Press this key or key 5 times
S
Press this key to enter value area
Screen display【 PDA. XXX 】
END
S
Save the values
A
Press this key to access
the position
LED display the equivalent angle value and
Flash 2 times stands for reading the setting value
The value in the displays announcement of the
parameter [181.PDA ] is approx.. 20 degrees.
＋ Power ON
CPU auto-select「machine code」and download
related parameters, display【 176. VDN 】
Step pedal forward making machine pulley rotate
at least over 2 turns
l2
P
OPERATION STEP DISPLAY AND REMARK
Installation
Turn hand wheel to align the
needle tip onto upper surface of
the stitch plate and arrest the
machine with "setting pin" at
position no. 4 (see pictures)
FRONT REAR
Caution: Remember to take out the setting pin after the adjustment,
it might damage the machine head when motor running.