Instruction manual

- 1 -

1. Safety Precaution

When install and operate HVP-70 MINI Servo Motor, precaution must be taken as the following.

This product is designed for specified sewing machines and must not be used for other purposes.

1.1 Work Environment:

(1). Power voltage:

Only use Power Voltage indicated on the name plate of the HVP-70 in ±10 % ranges.

(2). Electromagnetic pulse interference:

To avoid the abnormal running, please keep the product away from the high electromagnetic

machine or electro pulse generator.

(3). Temperature:

a. Please don’t operate in room temperature is above 45°C or under 5°C

b. Avoid operating in direct sun light or outdoors area.

c. Avoid operating near the heater.

d. Avoid operating in the area which humidity is 30% less and 95% more, also keep away dew

area.

(4). Atmosphere:

a. Avoid operating in dusty area, and stay away from corrosive material.

b. Avoid operating in evaporative or combustible gas area.

1.2 Safety in Installation :

(1). Motor and control box: Follow the instruction in this manual for proper installation.

(2). Accessories: Turn off the power and unplug the cord before mounting any accessories.

(3). Power cord:

a. Avoid power cord being applied by heavy objects or excessive force, or over bend.

b. Power cord must not set to be near the V-belt and the pulley, keep 3 cm space or above.

c. Check the outlet’s voltage before plugging the cord, make sure it match the voltage shown on

the name plate of the HVP-70 in ±10 % ranges.

(4). Grounding:

a. To avoid the static interference and current leakage, all grounding must be done

Please read this manual carefully, also with related manual for the machine

head before use. For perfect operation and safety, installing and operating

this product by trained personnel is required.

Ground Wire (Green/Yellow)

must be grounding.

OFF ON

3 Φ 220 V

Power wire

Grounding

Green/Yellow

Interference

Kee

awa