Instruction manual

- 22 -
Stitch Setting
Selection
A、B、C、D -- stitch setting range in 0
~ F (Note)
E、F、G、H -- stitch setting range in 0
~ 99
----
A=B=C=D=4 stitches
----
E = F = 10 stitches
----
G = H = 15 stitches
∴ Press key to select : Top A、B、C、D
Middle
E、F
Bottom
G、H
Needle Up /
Forward Stitch
Correction
1).In Free sewing:
One touch of this key act as stitch correction. (half stitch forward)
2).In constant-stitch sewing ： ( In Bar-tack sewing, it only act as needle up )
a. If sewing stops intermediately in one section, one touch of this key will
raise the needle to up position.
b. If sewing stops at the end of section, one touch of this key will correct one
stitch forward.
One-Shot-Sewing
Selection
1). In Free sewing and Bar-tack sewing：
One touch of this key make beep sound but have no function, also LED does
not light up,.
2). In Constant-stitch sewing：
a. One shot to the pedal, automatic performed number of stitches of E、F、
G、H sections.
b. Toe down the pedal again and again to finish rest the sections until it finish
pattern.
Trimming Cycle
Selection
Enable or disable the trimming cycle.
Note : Stitches setting of A、B、C、D sections correspond to the alphabet.
A=10、B=11、C=12、D=13、E=14、F=15 stitches