Instruction manual

- 21 -

10. Operation Box :

(1).Operation Box Diagram :

(2). Key Functions :

FUNCTION KEY OPERATION OF SEWING MACHINE

Single start back tacking

Start Tacking

Selection

Double start back tacking

Single end back tacking

End Back

Tacking Selection

Double end back tacking

Free Sewing

1). As the treadle is toed down, machine will start sewing. Once the treadle

returned to neutral, machine will stop immediately.

2).

As the treadle heeled back, the trimming cycle will be finished automatically.

Bar Tack Sewing

Once the treadle is toed down, all the seams of Bar Tacking, A、B、C、D

sections will be completed with E times, and the trimming cycle will be

finished automatically

Note：When the bar tack sewing start, it will not stop until the trimming cycle

finished, except for the treadle heeled back to cancel the action.

Constant-Stitch

Sewing

1). As the treadle is toed down, Constant-stitch Sewing E、F、G or H

performed section by section.

2).Once the treadle returns to neutral intermediately in any one section,

the machine will stop immediately. When the treadle toed down again

the balanced stitches of E、F、G or H goes on.

3). If the parameter【010. ACD】is set ON, the machine will not stop and

automatically start trimming cycle and end back tacking at the end of the

last section E or H.