Instruction manual

- 7 -
P S
A B C D
LOGO
Remove 4 screws
(5). How to supply an additional power source from the control box :
Caution 1 : Turn off the power & wait for 10 min. before
opening the cover,
Caution 2 : When turning off the control box’s power
switch, it will not turn off the additional,
Please add switch for the power.
High voltage inside
P
S
A
B
C
D
LOGO
Caution：Unplug the power cord before doing any one of the following steps.
Step 1
When cable extended out from
the box, protect the cable with
a protective sleeve to avoid
wear and tear
Step 2
Caution : Use round head
CN 5
CON2-BROWN
CON1-BLUE
CON4-GREEN
Brown
Blue
Green/Yellow
Recommend use PVC cable
Step 3
(
A )
)
Main board layout:
CN 5 Additional power connector Cable hole ( A )
HSV-MC122012C
S
C 7 C 8
C 9
Caution ： 1. Secure the round terminals tightly on CN5 to avoid electric noise and spark, which caused
by the bad connection.
2. Have the cable passed through and secured at the hole (A) .