Instruction manual

-1-

For medium-weight materials For light-weight materials For heavy-weight materials

Sewing speed Max. 5,000 rpm Max. 4,000 rpm Max. 4,000 rpm

DBx1#20to#23(134#125to#160)

10 mm (Standard)13 mm (Max.) 9 mm (Max.)

10 mm (Standard) 13 mm (Max.)

Lubricating oil 10 White Oil

Workplace-related noise at sewing speed n 5000min : Lpa 83dB(A)

Noise measurement according to DIN 45635-48-A-1.

-1

Noise

Application

Stitch length Max. 5 mm Max. 4 mm Max. 5 mm

DBx1#9to#18(134#65to#llO)

DBx1#9to#11(134#65to#75)

Needle

Presser foot lift (by knee lifter)

251-140040 251-140040 A 251-140040 H

1. SPECIFICATIONS

(1) Installing the oil pan

1) The under cover should rest on the four corners of the machine table groove.

2) Fix the hinge by screw on the base plate.Fix the rubber seats of the front side to the

protruded side of the table by round nail , then using round nail to fix rubber seats of the

hinge side and fix the hinge holder in the table slet by screw , then place the oil pan .

3) Put the machine head on the rubber seat .

4) Keep horizontal level when installing the machine head.

16 2 1 A

2223

B574

WARNING:

To avoid possible personal injury due to abrupt start of the machine, turn off the power to the machine

and check to be sure that the motor has totally stopped rotating in prior.

2. INSTALLATION