Operating instructions

Short Seam Automat 2110-5 / 2111-5 Workinging Instructions
- D 86 -
Beisler Automated Sewing Equipment
D.4
Factory settings
D.4.2 Factory settings for special parameters


 M01 Special parameters 2110-5:
Pos. SEAM 01 - POCKET FACING Value Unit
01 CLAMP POSITION RIGHT
045 mm
02 FOLDER SWING RELEASE
120 mm
03 INSERT SPEED
80 %
04 CLAMP SPEED
99 %
05 WAITING POSITION
48 cm
06 SEWING SPEED 1
1000 Rpm
07 SEWING SPEED 2
4500 Rpm
08 SEWING SPEED 3
1000 Rpm
09 DISTANCE SEWING SPEED 1
10 mm
10 DISTANCE SEWING SPEED 3
10 mm
12 THREAD MONITOR ON AFTER
10 mm
13 TOP THREAD MON. FILTER
20 mm
14 BOTTOM THREAD MON. FILTER
00
16 TACKING LENGTH SEAM BEG
00 mm
17 TACKING LENGTH SEAM END
00 mm
18 STITCH LENGTH SEAM BEG
2.0 mm
19 DISTANCE OF THIS ST.LEN
08 mm
24 ST.LENGTH OF MAIN SEAM
3.0 mm
25 STITCH LENGTH SEAM END
2.0 mm
26 DIST.OF THIS ST.LENGTH
08 mm
27 ST.LENGTH TRIMM.STITCH
2.0 mm
28 CHOICE OF TRIMMING ST
00
30 START MODUS
01
31 CLAMP/CURVE CODE
00
32 BLOWING MODUS
00
33 PUSH RETAINER MODUS
00
34 WING RETAINER MODUS
00