Operating instructions

- D 69 -

Short Seam Automat 2110-5 / 2111-5 Workinging Instructions Beisler Automated Sewing Equipment

D.3

Programming

D.3.2 Service menu start level



 Filling spool

Insert thread and fill spool:

• Press key.

Acknowledge status messages on display:

If the message SPOOL EMPTY is displayed, insert a full

spool and

• Press % key.

If the message SPOOL: 004 M is displayed when a full

spool is inserted

• Press  key

• Press  key

NOTE - Rest thread monitor sensitivity!

If the spool is empty and the display does not show a status

message, the photocell sensitivity must be adjusted (see

Section C, Service Instructions).



 Resetting the insertion process

This function depends on the mode of machine operati-

on. It refers only to machine movements that can be per-

formed before the automatic operation.

The machine movements will be reset to start position.

• Press  key (several times if required).