Operating instructions

- C 45 -
Short Seam Automat 2110-5 / 2111-5 Working Instructions Beisler Automated Sewing Equipment
C.5
Maintenance
C.5.5 Machine set-up
Folder bar to folder clamp alignment:
To ensure that the folder can crimp over the pocket edge
evenly, the folder clamp
1
must pe positioned centrically
above the folder bar
2
.
Folder bar adjustment:
1. Fig. 16: Fasten pick-up plate by rotating handwheel
3
completely to minus range.
Loosen retaining screw
4
of folder bar bracket at the
worktable underside and reposition bracket
5
.
2. Tighten retaining screw.
Automatic label feed system positioning:
The position of the automatic label feed system at the in-
serting station can be changed by repositioning the bracket
of the automatic label feed system on the guide bar.
1. Fig. 17: Loosen bracket retaining screw
1
and repo-
sition bracket
3
on guide bar
2
.
2. Tighten retaining screw.
Fig. 16/17
Fig. 16
Fig. 17
12
3