Operating instructions

Short Seam Automat 2110-5 / 2111-5 Working Instructions
- C 44 -
Beisler Automated Sewing Equipment
C.5
Maintenance
Fig. 15
Fig. 15
C.5.5 Machine set-up
Folder to pick-up plate alignment:
To ensure that the folder can pick up the pocket edge even-
ly, the folder must lie upon the pick-up plate along its entire
length.
Pick-up plate inclination adjustment:
1. Fig. 15: Fasten pick-up plate by rotating handwheel
4
completely to minus range.
2. Move folder
2
to pick-up plate
3
using input/output
control functions:
• Move folder to right.
• Lower folder.
3. Adjust pick-up plate inclination so that the folder lies
absolutely even on the pick-up plate by loosening the
two retaining screws
7
of the pick-up plate bracket
5
on the worktable underside and rotate the bracket
at the holder
6
.
4. Tighten retaining screws.
5. Readjust folder rail
2
. Slightly loosen retaining screws
1
and depress folder rail evenly onto pick-up plate.
6. Tighten retaining screws
1
.