Operating instructions

- C 39 -

Short Seam Automat 2110-5 / 2111-5 Working Instructions Beisler Automated Sewing Equipment

C.5

Maintenance

C.5.4 Repairs

Clamp rail replacement:

The clamp rail must be replaced if the protective lining at

the bottom side of the rail is worn.

Clamp rail removal:

1. Fig. 8: Lift main clamp

2. Loosen retaining screw

3. Pull clamp rail

down and remove.

Clamp rail installation:

1. Insert clamp rail

into fixture

and push up until

it reaches the stop. Make sure the clamp rail is positio-

ned evenly in the fixture.

2. Tighten retaining screw

Fig. 8