Operating instructions

Short Seam Automat 2110-5 / 2111-5 Working Instructions

- C 32 -

Beisler Automated Sewing Equipment

C.3

Start-up

C.3.2 Compressed air connections

Fig. 3: The compressed air connection is preinstalled on

the machine. It comprises the following components:

• Pressure reducer

with manometer

and water

separator

• Pressure hose with push-in plug

The pressure reducer is installed at the side mounting wall

of the worktable.

Connecting the machine to the compressed air sup-

ply system:

1. Connect pressure hose plug to on-site terminal unit.

2. Open on-site compressed air supply.

3. Set pressure reducer to a machine operating pressure

of 6 bar by rotating pressure reducer knob

and read

value on manometer

• To increase pressure, rotate in clockwise direction.

• To reduce pressure, rotate in counter-clockwise di-

rection.

Fig. 3