Operating instructions

Short Seam Automat 2110-5 / 2111-5 Working Instructions
- B 22 -
Beisler Automated Sewing Equipment
Fig. 10/11
Fig. 10
Fig. 11
B.3
Operation
B.3.3 Selecting the sewing program
After the machine has been switched on and the control
program has been booted, the display
1
on the ope-
rating panel shows the most recently selected sewing
program.
Sewing programs
2
are stored in the memory (M). The
program control memory can store up to 50 sewing pro-
grams (M 01-M 50).
Fig. 10: For each sewing program, up to six seam
numbers
3
(01, 02, 03, 04, 05, 06) can be assigned.
The six seams differ only in their control functions (see
Section D.2.1, Program structure).
The program control of the machine is equipped at the
factory with a standard program:
• Sewing program M 01 with six different seams for auto-
matic crimping over of pocket edges and the tucking of
pocket edges to pocket bags.
1. Select sewing program at operating panel.
Request memory:
• Press  key.
Select sewing program number, e.g. 01:
• Press  and  keys.
The selected program is activated immediately.
2. Select seam number of desired seam.
Move cursor to seam number:
• Press 0 or / key.
Confirm selection:
• Press % key.
Fig. 11: Display during seam number selection:
1
Active seam number
2
Passive seam number
3
Seam number is selected