Operating instructions

1
7
4. Optional equipment
The following optional equipment is available for the automatic
bartacker 510:
Order No. Optional equipment
see Spare Parts List Special clamping foot set (optional/special manufacture, APC) ”
0510 59 004 4 Laser marking light (3 lights)
0510 59 003 4 Additional laser light
0510 59 005 4 Push button
9822 51 002 6 Sewing light
9822 51 002 7 Table clamp
9870 00 102 1 Cable assembly (add-on kit socket for sewing light)
0510 59 006 4 Pneumatic sewing foot lifting (510-211, -213)
0510 59 009 4 Conversion kit class 510-211 into -213
0510 59 010 4 Electric thread wiper (510-211, -213)
0510 15 001 4 “Large capacity hook”; conversion kit class 510-213 into -214
Further optional equipments are available. Please contact our application centre (APC).
E-mail: [e-mail]
5. Stands
The following stand is available for the automatic bartacker 510:
MG55 40 029 4 Stand package
Table top size 600 x 1060 mm
Stand height 1160 to 1305 mm
6. Technical data
Noise: Lc = 78dB(A
Emission value per work place according to DIN 45635-48-A-1-KL-2
Bartack length: 15 mm
Stitch/Bartack: 28
Throw width: 2.5 mm
Speed: 2700 min
-1
Fabric: G1 DIN 23328 two-ply
Sewing cycle: 1.3 sec on and 1.0 sec off