Operating instructions

8.6.2 Application messages
Picto- Description Category Reaction / Troubleshooting
gram
Capacity counter is “zero” Hint
· Clamping foot can only be
lowered after
confirmation via the “OK”key.
After the confirmation, the hint
disappears.
· With the confirmation, the capacity
counter is reset to its
initial value again.
Handwheel turned
manually
Warning
After interruption of the sewing procedure:
· Impossible to continue sewing
· Stop the sewing process by
stepping the pedal backwards,
confirmation with push button key 1
(clamps) or pressing the “ESC” key at
the control panel
seam pattern exceeds the
inner frame of the
clamping foot either -X or
+X direction
Warning
· No sewing start possible
· Select another clamping foot
· Choose another sewing pattern
· Reduce size of sewing pattern in
X-direction
Contour exceeds the inner
frame of the clamping foot
in -X or +X direction and
Y-direction
Warning
· No sewing start possible
· Select another clamping foot
· Choose another sewing pattern
· Reduce size of sewing pattern in
X-direction
· Reduce size of sewing pattern in
Y-direction
Contour exceeds the inner
frame of the clamping foot
in -X and -Y direction or
+Y-direction
Warning
· No sewing start possible
· Select another clamping foot
· Choose another sewing pattern
· Reduce size of sewing pattern in
Y-direction
Contour exceeds the inner
frame of the clamping foot
in +X and -Y direction or
+Y-direction
Warning
· No sewing start possible.
· Select another clamping foot
· Choose another sewing pattern
· Reduce size of sewing pattern in both
X- and Y-direction
Contour exceeds the inner
frame of the clamping foot
in X and -Y direction or
+Y-direction
Warning
· No sewing start possible.
· Select another clamping foot
· Choose another sewing pattern
· Reduce size of sewing pattern
X-direction
Reduce Y-Offset in the corresponding
direction
Contour exceeds the inner
frame of the clamping foot
in -Y or +Y direction
Warning
· No sewing start possible.
· Select another clamping foot
· Choose another sewing pattern
· Reduce Y-Offset in the corresponding
direction
1
79