Operating instructions

Initialization (Init)
The selection of the submenu for the initialization of the event memory
and the permanent data.
event memory
variants + sequences
machine parameters
free seam contours
machine complete
Event memory
Via this menu item the event memory can be reset to zero.
Seam pattern programs (variants) and sequences
Via this menu item seam pattern programs and sequences can be
deleted.
Machine parameters
Via this menu item machine parameters, soft start driving speeds,
timings, user configuration, hook thread counter data and options and
the existence of a monitoring switch for clamping foot to factory
settings can be reset.
Free seam contours
Via this menu item all free seam contours can be reset (deleted).
Note
Through resetting it may occur that seam pattern programs and
sequences are eventually deleted and numbers of subsequent
programs and sequences may be altered.
Machine complete
Via this menu item all permanent data can be reset. After resetting the
machine will automatically be restarted.
Note
After the restart of the machine, a new selection of the clamp numbers
and the equipment must be carried out (compare installation
instruction, chapter 9).
62
Var . + Sequ.
Maschinenpar.
Fr. Konturen
Masch. kpl!
Ereignissp.