Operating instructions

PWM Output test

This test function checks the function of the magnets.

–

Start the test function by actuating the “OK”key.

–

Select the desired output element by actuating the “ï“or“ð“keys.

–

Switch the selected output element on and off by pressing the

“ñ”or“ò”keys.

PWM output test

output

–

The issued value for the selected output element is displayed. The

value specifies the impulse rate for the controlling of the output

element.

–

If the machine is equipped with a monitoring switch of the clamping

foot, the Output PWM-1 will have the value + or - will be displayed,

according to the switching status of the output element.

–

Actuate the function key “ESC” in order to leave the test function

Caution: Danger of injury !

Do not reach into the running machine during the function test of the

output elements.

Output element Function

PWM 1 Clamping foot magnet

PWM 2 Trimmer magnet

PWM 3 Thread wiper magnet