Operating instructions

Output test

With this test function the function of the output elements is checked.

–

Start the test function with the key “OK”.

–

Select desired output element with the keys “ñ”or“ò”.

–

Switch desired output element on and off with the key “OK”.

output test

output

–

Press function key “ESC” for leaving the test function.

Caution: Danger of injury !

Do not reach into the running machine during the function test of the

output elements.

Output element Function

Y 1 Laser marking light 1, if the option is activated

Y 2 Laser marking light 2, if the option is activated

Y 3 Laser marking light 3, if the option is activated

Y 4 Separated clamping foot 1, if the option is activated

Y 5 Separated clamping foot 2, if the option is activated

Y 6 Depending on the activated option and the output configuration

Y 7 Depending on the activated option and the output configuration

Y 8 Depending on the activated option and the output configuration

The recent configuration of the outputs is indicated in the submenu

“Output configuration” of the menu equipment.