Operating instructions

Lock sequences
In this submenu individual sequences can be released or locked for
selection in the sewing mode.
The menu item is only displayed, if more than one seam pattern
sequence is programmed (compare with chapter 8.5.3)
lock all
unlock all
on
on
In general the following restrictions apply:
1. Seam pattern operation
·
The last sequence selected in the sequence operation cannot be
locked.
2. Seam pattern sequence operation
·
The sequence currently selected in the sewing mode cannot be
locked.
·
In the sewing mode locked sequences cannot be chosen from the
selection list.
Locked sequences are marked with “#”.
Lock all
All sewing sequences with the restrictions specified above will be
locked.
The status of the displayed sewing sequence number switches to “OFF”.
Unlock all
All sewing sequences will be released.
The status of the displayed sewing sequence number switches to “ON”.
Lock/unlock individual sewing sequence
Input: ON / OFF
48