Operating instructions

Submenu Configuration
hand switch:off
el.thr.wiper:off
_/-clamp: off
laser light: off
thr. burner off
opt. sign.
assignment input
Further optional equipments are available. Please contact our
application centre (APC).
Hand switch
Activating of optional hand switches. When the option is switched on, a
menu item in order to select the operation mode will appear in the
menu “User configuration”.
Input: ON/OFF
Electric thread wiper
Activating of optional electric thread wipers (instead of the mechanic
thread wiper).
Input: ON/OFF
Separate lowering of the clamping foot
Activating the operating of the optional separate clamping feet.
Input: ON/OFF
Operating the separate lowering of the clamping foot
NOTE!
The function is only available with seam pattern programs (variants).
Sewing procedure with pedal
–
Push the pedal to the front to level 1: clamp 1 will be lowered
–
Move the pedal into resting position
–
Push the pedal again to the front to level 1: clamp 2 will be lowered
–
Push the pedal to level 2: the sewing process will be started
–
Push the pedal back to level:
the clamp closed last will be lifted again
–
Push the pedal back to level and keep it pushed (0,8 sec.): clamp 1
and clamp 2 will be lifted one after the other
41
1