Operating instructions

Referencing
In this menu point the referencing mode of the step motor after the
sewing process can be configurated.
Input: 0 = no referencing
1 = referencing each time
2 – 10 = referencing after each 2nd to 10th sewing
process
Submenu Soft start
In this submenu speed adjustments for the soft start can be made.
Speed first stitch
Input of the speed in the first stitch.
Input: 400 … 900 [rpm]
Speed second stitch
Input of the speed in the second stitch.
Input: 400 … 2700 [rpm]
Speed third stitch
Input of the speed in the third stitch.
Input: 400 … 2700 [rpm]
Speed fourth stitch
Input of the speed in the fourth stitch.
Input: 400 … 2700 [rpm]
Speed fifth stitch
Input of the speed in the fifth stitch.
Input: 400 … 2700 [rpm]
38