Operating instructions

Submenu machine parameters
cut.rpm
max.rpm
stop pos.
sew.st.pt.
softstart
sew. equipment
–
Select desired parameter with the keys “ñ”or“ò”.
The symbol of the selected parameter / submenu is displayed white
on black.
–
Start selected parameter with the key “OK” or change into the
submenu.
Cutting speed
Input of the sewing motor speed in the last three stitches.
Input: 100 … 600 [rpm]
Maximum sewing speed
Input of the maximum adjustable sewing speed
Input: 2000 … 2700 [rpm]
Stop position
With the stop position the positioning of the sewing motor / needle bar
can be altered.
Input: 0 = thin fabrics
-15 = thicker fabrics
Note
The stop position is required for adjusting the corresponding material
thickness.
Feeding position
Selection of the material feeding position.
Input: A = Seam beginning point
B = Machine neutral point
Note
According to the feeding position the following advantages /
disadvantages arise:
Feeding point A = shorter cycle time
Feeding point B = easier feeding of large seam patterns,
longer cycle time
1
37
Referenz.: 1