Operating instructions

Menu items in the main menu of the seam pattern sequence

Sequence

Selection of the seam pattern sequence.

Input: 1 (2 … 25, if available)

Sequence succession

Display of the sequence succession.

The current seam pattern number is marked with a bar (underlined).

In case of more than five numbers the display is scrolled.

–

Further seam patterns right:

Further seam patterns left:

Further seam patterns left and right:

Automatic operation

After the completion of a seam pattern the control changes over to the

next seam pattern shape automatically.

After sewing of the last seam pattern the control changes over to the

first seam pattern within the sequence again.

The current seam pattern is marked by a bar below the number.

The shape of the selected seam pattern is indicated on the left half of

the display.

Manual operation

The control does not change between the seam patterns automatically.

–

Select the next seam pattern with the keys “ï ”or“ð ”.

The shape of the selected seam pattern is indicated on the left half

of the display.

Change between automatic and manual operation

–

Select the second menu line with the keys “ñ ”or“ò ”

(sequences) .

–

Press key “OK”.

–

Select the kind of operation with the keys “ñ ”or“ò ”.

In case of automatic operation arrows are indicated between the

seam patterns.

Automatic operation

Manual operation