Operating instructions

8.5.2 Programming mode

Under this menu item the parameters for programming of seam

patterns are arranged.

With the help of the parameters shape, length, width, speed etc. of the

seam pattern are entered.

Off

–

Switch on main switch.

The control is initialized.

The main menu appears.

–

Press function key “P” on the main menu.

The display changes over to the menu of the programming mode.

–

Select desired parameter with the keys “ñ ”or“ò ”.

The symbol of the selected parameter is displayed white on black.

–

Alter selected parameter as described in chapter 8.3.

Number of seam pattern

Via this parameter the number of the seam pattern to be created or

altered is selected.

When preparing a new programme an asterisk (*) is indicated before

the number.

Input: 51 … 90

–

Select desired seam pattern programme with the keys “ñ ”or“ò ”.

–

Press key “OK ”.

The program is activated.

Basic seam pattern

Via this parameter a standard seam pattern can be selected on the

basis of which the new seam pattern is to be created.

Input: 1 … 50 or

91 … 99 if available

Sewing speed

Via this parameter the desired sewing speed can be adjusted.

Input: 0 … 2700 [rpm]

Submenu seam pattern dimension

Select the present menu to set the seam pattern length

and width.

Display: present length/width