Operating instructions

8.4 Seam patterns
Three different seam pattern types are available for the automatic
bartacker 510:
·
Specified standard seam patterns (Type 1) (see chapter 11)
The sewing parameters length, width and sewing speed can be
altered in the sewing mode; the laser marking lamps can be
switched on and off. The alterations are memorized.
However, after selection of another seam pattern the alterations
will get lost.
For these seam patterns the seam pattern numbers 1 to 50 are
available which cannot be deleted or overwritten.
·
Programmable seam patterns (Type 2)
Specified standard seam patterns can be altered in the
programming level (length, width, sewing speed, laser light 1 to 8)
and memorized under a new program number.
For these seam patterns the seam pattern numbers 51 to 90 are
available which can be deleted or overwritten.
·
Free seam contours (Type 3)
For these seam contours the seam patterns numbers 91 to 99 are
available. The creation of free seam contours is described in
chapter 8.5.4.4.
The sewing parameters length, width and sewing speed can be
altered in the sewing mode; the laser marking lamps can be
switched on and off. The alterations are memorized.
However, after selection of another seam pattern the alterations
will get lost.
1
21