Instruction manual

4.4 Mounting the pedal

–

Fasten pedal 5 on the stand strut 4.

–

Align pedal 5 as follows for ergonomical reasons:

The center of the pedal has to be approximately under the needle.

The stand strut 4 is equipped with slotted holes for aligning the

pedal.

–

Hang in the pedal rods 3.

–

Loosen screw 6 slightly.

–

Adjust the height of the pedal rods 3 as follows:

The discharged pedal 5 should have an inclination of approx. 10°.

–

Tighten screw 6.