Operating instructions

D-10

Programming Instructions Automatic Multi-Head Serging Machine 1365-4Beisler GmbH

D.3

Programming

3. To move up or down in the parameter list:

 Press the § or $ key

The input field for the parameter appears on a black background.

4. Modify the value:

 Press the & or / key

or enter a two-digit or three-digit value using the numeric keypad. In-

put sequence: Hundreds digit, tens digit, units digit.

5. Confirm input and exit menu:

 Press the ( key

Enabling or disabling sewing functions or machine functions:

For specific sewing patterns or as the result of a specific material beha-

vior, all six functions can be enabled or disabled individually or in com-

binations.

1. Select the function at the A machine or B machine:

 Press the c or f key

s s

until the symbol assigned to the input field appears on a black back-

ground.

2. Move to the basic parameter menu of the selected function:

 Press the % key

3. Enable or disable the function:

 Press theh key

4. Confirm input:

 Press the ( key

Fig. 4: At the B machine

where the inseam

is effec-

ted, press the F8 key

to enable the puller

function.

When this program function is selected, the parameter list

assigned to this specific sewing function

is opened.

Fig. 4