Operating instructions

C-25
Service Instructions Automatic Multi-Head Serging Machine1365-4 Beisler GmbH
C.5
Maintenance
C.5.20 Inputs and outputs of the main PCB
Fig. 19: The inputs and outputs for controlling the machine functions
are connected to the terminal strips X24-X27.
1
X 24 Inputs
2
X 25 Outputs
3
X 26 Outputs
4
X 27 Inputs
X24 Inputs
Swing arm ES02
Cross transport ES01
Bonding clamp ES04
Bonding start ES05
Thread monitor A ES08
Thread monitor B ES09
Photocell C ES10
Cont. guide photoc. A ES11
Prog. start photoc. A ES12
Prog. start photoc. B ES13
Crs. trnsp. stop photoc ES14
Protect. strap photoc. ES15
Cont. guide photoc. B ES16
X25 Outputs
Pressure foot up A Y10
Tension blowing A Y14
Chain cutting A Y12
Table blowing A Y13
Dirt aspiration A Y15
Crs. transp. stamp A Y09
Cont. guide down A Y16
Puller down A Y17
Roller down A Y18
Contour roller A Y19
Pressure foot up B Y20
Tension blowing B Y24
Contour roller B Y38
Fly blowing B Y31
Stacker start Y32
Stacker motion Y35
X26 Outputs
Chain cutting B Y22
Table blowing B Y23
Dirt aspiration B Y25
Contour guide down B Y26
Puller down B Y27
Roller down B Y28
Swing arm stamp downY33
Swing arm in Y34
Transport up A / B Y36
Support swinging Y37
Bonding clamp down Y3
Bonding station down Y4
Pressure foot up C Y1
Chain/Dirt aspiration C Y5
Puller swinging Y39
X27 Inputs
Photocell Y22
Fig. 19