Operating instructions

Operating Instructions Automatic Multi-Head Serging Machine 1365-4 Beisler GmbH
B-11
B.2
Functions of the machine
B.2.6 Transport
Transport unit of A machine, Fig. 10:
The transport unit of the A machine consists of
puller
2
and roller
3
.
 The puller transports the sewing pieces du-
ring the sewing process.
 The roller moves the sewing pieces to the
cross transport and also supports the trans-
port function of the puller. This function can
be enabled for heavy fabrics.
To improve the gliding characteristics of the trou-
sers panels, the working plate has six compres-
sed-air nozzles
1
near the A machine. The air
blows from below against the trousers panels; the
resulting air cushion reduces friction during the
transport.
Cross transport, Fig. 11:
The cross transport, consisting of double stamp
1
and accessory stamp
4
, picks up the se-
wing pieces
3
at the A machine and transports
them across the sliding panel
2
to the B ma-
chine. If the sewing process at the B machine is not completed, the cross
transport stops at a wait position
5
in front of the B machine.



Fig. 10
Fig. 11