Operating instructions

- Freely programmable parameters for
“Differential lower feed (optional)”, “Upper feed
(optional)”, “Roll-out Device”, “Puller”, “Machine
Parameters”,
“Global Parameters”, “Program Sequences”
- Input and Output Tests
- Test routine for stepper motors
- 20 Program Memory Capacity
- up t o 7 seam programs per program storage space
–
Vertical cutter with suction device for overseaming and serging in
aworkstep.
–
Programmable chain cutting device with suctioning.
–
Adjustable blow nozzles in the table top for supporting the sewing
material feed, mechanical regulation of the blow strength by
means of adjusting knob, duration of table blowing is
programmable.
–
Positioning table with mouse and retraction device for the
workpiece;
for uniform workpiece guidance and higher productivity.
–
Special sewing equipment for trouser side seams with side seam
pockets and slant pockets.
–
Narrow gauge parts including narrow sewing foot for problem-free
feed/ sewing of the pocket openings.
–
Automatic contour control through programmable puller.
–
Height-adjustable rack, infinitely variable from 850 mm up to 1200
mm.
–
Automatic fullness distribution through stepper motor controlled
upper and lower feed (optional).
Within a seam program, the fullness of the upper and lower feed
can be programmed a t the operating panel by means of 3 freely
selectable segments.
User-friendly adjustment option for fullness in a segment by
means of one control each.
–
Integrated destacking device.
–
Manual destacking by means of the shortcut key.
1.3 Technical Data
Machine Head: Pegasus EXT 3216-03/233-K 5x5-KH-021A
Type of stitch: 401, 515, 516
Number of needles: 1 or 2
Needle system: B27
Needle thickness: Nm 80 to Nm 110
Type of hook: Looper crosswise to feeding direction
Serging looper
Yar n: see table in Chapter 4.2
Speed: 6,500 min
-1
Speed at delivery: 6,500 min
-1
Stitch length:
min. 0.5 mm
max. 3.5 mm
Seam width: 10 mm
Optional 8 - 12 mm
Workpiece: Light weight to medium weight
Operating pressure: 6 bar
Air consumption: 20 NL per working cycle
4