Operating instructions

1
7.3 Saving the seam programs and seam parameters on the USB stick
–
Switch off the main switch.
–
Insert the USB stick in the slot of the operating panel.
–
Switch off the control element.
–
Tap the symbol.
The display changes to the main menu.
–
Tap the symbol.
The display changes to the display screen “Saving the seam
parameters”.
–
Tap the symbol “Control on USB stick”.
The display screen changes to selection.
–
Tap one file out of the five file options.
–
Tap the symbol “Control on USB stick”.
The display changes to the screen “Save”.
–
Tap the symbol.
The display changes to the main menu without saving.
Or
–
Tap the symbol.
The seam program and all the parameters are saved.
51