Operating instructions

Checking the outputs
–
Tap the symbol for the outputs.
The display changes to Outputs.
–
Tap the symbol “Y 1”.
The display appears inverted
and the output is switched on at the same time.
–
Tap the symbol “Y 1” once again.
The output is returned to its original position.
–
Tap the symbol.
The subsequently selected output is automatically switched
on/off.
Output element
Switch Designation
Y01 Sewing foot up/ down
Y02 Thread tension lift
Y03 Contour guide up/ down
Y04 Stacker off / on
Y05 Roll-out device up/ down
Y06 Transport unit up/ down
Y07 Contour guide forward / backward
Y08 Contour guide blowing on
Y09 Move contour guide sideways
Y10 Differential lower feed on / off
Y11 Upperfeedon/off
Y12 Warp thread separator off / on
Y13 Table blowing off / on
Y14 Dirt suctioning off / on
Y15 Puller up/ down
Y16 Mouse retracted
46