Operating instructions

6.4.5.2 Machine parameters
–
Tap the symbol.
The display changes to the machine parameters.
–
Select the desired parameter with the arrow keys.
–
Tap the symbol “E” in order to adopt the selection.
–
Changing the value.
–
Tap the symbol “P” in order to save the selection.
Parameter 30: Adjusting the main speed
Parameter 31: Manual sewing on/ off
Parameter 32: Length of time during which table blowing
rem ai n s sw it c h ed o n
Parameter 33: Number of stitches before start of sewing is followed
by
automatic start
Parameter 34: Number of stitches until the contour guide is
lowered
Parameter 35: Number of stitches until the contour guide
moves in sideways
Parameter 36: Number of stitches until the transport unit
is lowered
Parameter 37: Start mode for contour control
0 = front right
1 = front left
2 = rear right
3 = rear left
Parameter 60: Soft-start speed
Parameter 61: Switching on or switching off the soft-start
Parameter 77: Switching on or switching off the auto-start
Parameter 78: Number of stitches before the auto-start begins
Parameter 120: Sewing foot lift in the seam
Parameter 121: Sewing foot lift at s eam start
40